CPS2.11
High-Efficient, Lightweight
Two-Channel
Power Amplifier
Key Features:
•
•
•
•
•
•
•
•
•
•
2 x 1600W/2 Ohms
High Efficient Class-H Design
2 U Rack Space
Detend Rear Level Controls
Complete Protection Package
Dynamic Limiter
Technical Specifications:
Load Impedance:
2 Ohms
4 Ohms
8 Ohms
600W
Maximum Midband Output Power
(THD = 1%, 1 kHz, Dual Channel):
1600W
1100W
Phoenix Type Inputs
Rated Output Power
(THD = 0,1 %, 20 Hz - 20 kHz):
-
-
900W
3200W
78V
450W
Barrier Outputs
Maximum Bridged Output Power
(THD = 1%, 1 kHz):
Retrofit Signal Processing Kits
Remote Power On/Off
2200W
Maximum RMS Voltage Swing
(THD = 1%, 1 kHz):
Power Bandwidth
(THD = 1%, 1 kHz, Half Power @ 4 Ohms):
10 Hz - 60 kHz
32.0 dB
General Description:
Voltage Gain ref. 1 kHz:
The Electro-Voice® CPS2.11 is from the Contractor Precision
Series of professional amplifiers. The high efficient Class-H
design reduces the power dissipation significantly and allows for
more amplifier channels and output power in a given rack space.
Input Sensitivity
(@ Rated Power, 8 Ohms, 1 kHz):
+5.8 dBu (1.51 Vrms)
< 0.05%
THD @ Rated Output Power
(<0.1%, CPS2T@100V):
IDE-SMTP (60 Hz, 7 kHz):
DIM 30 (3.15 kHz, 15 kHz):
<0.02%
<0.05%
The audio performance of the CPS2.11 is state-of-the art and
fulfills the highest sound expectations in demanding applications
from concert sound to theater. The CPS2.11 features the same
complete protection package as all EV Precision Series ampli-
fiers. Protection against: excessive HF, DC fault, high tempera-
ture, and Back-EMF as well as turnon delay, peak current and
inrush current limiters. In addition to the rated output power the
CPS2.11 provides up to 30% percent headroom for a wide
dynamic range on music signals. The onboard dynamic limiter
ensures that the output clipping of the CPS2.11 will not exceed
a THD of 1% up to an input signal of +21dBu. Detented level
controls on the rear panel provide precise (1dB-detend) and
repeatable settings.
Maximum Input Level:
+22 dBu (9.76 Vrms)
<-80 dB
Crosstalk (ref. 1 kHz, Rated Output Power):
Frequency Response (+/- 1 dB, ref. 1 kHz):
Input Impedance Active Balanced:
Damping Factor @ 1 kHz:
15 Hz - 40 kHz
20 kOhms
>300
Slew Rate:
35 V/us
Signal-to-Noise Ratio (A-Weighted):
107 dB
240V, 230V, 220V, 120V, or
100V; 50 - 60 Hz
Power Requirements1:
(Factory Configured)
Power Consumption:
820W
Power Dissipation
(1/8 Max. Output Power @ 4 Ohms):
Front panel LEDs indicate signal present, 0 dB, and limit. Female
XLRs and Phoenix type connectors for inputs and barrier strips
for outputs provide an easy rack wiring. The power on/off function
of the CPS2.11 can be remote controlled via a 24V DC source.
Optional x-over cards for biamp operation (e.g. a 2-way cinema
system) can be retrofitted.
396W (1350 BTU/hr)
Audio Limiters, High Temperature,
DC, HF, Back-EMF, Peak Current
Limiters, Inrush Current Limiters,
Turn-On Delay
Protection:
Cooling:
Front-to-Rear, 3-Stage Fans
483mm x 88.1mm x 368.8mm
(19” x 3.5” x 15.22”)
Dimensions (W x H xD):
Net Weight:
8.15 kg (17.96 lbs)
9.65 kg (21.26 lbs)
Shipping Weight:
- Amplifier at rated conditions, both channels driven, 8 ohm loads, unless otherwise specified.
1 Factory Configured.
|
Eiki Projector LC NB3E User Manual
Electro Voice Stereo Amplifier P 3000 User Manual
Fisher Price Baby Toy V4377 User Manual
Fisher Price Baby Walker L4511 User Manual
Gas Fired Products Electric Heater PTS User Manual
GE Coffeemaker 169086 User Manual
GE Home Security System 45227 1 User Manual
GE Home Security System FTP 1000 User Manual
GE Universal Remote 45600 User Manual
GE Water System FQSVF User Manual