Fujitsu Scanner fi 6110 User Manual
P3PC-3002-01EN  
fi 6110  
-
Image Scanner  
Getting Started  
Thank you for purchasing fi-6110 Color Image Scanner (hereinafter referred to as "the scanner").  
This manual describes the preparation required for use of the scanner. Follow the preparation procedures  
described in this manual.  
Make sure to read the "Safety Precautions" document provided with the scanner before use. For details  
about scanner functions and features, basic operation, daily care, consumable replacement and  
troubleshooting, refer to the "Operator's Guide" (PDF). The "Operator's Guide" is displayed by clicking  
[USER'S GUIDE] J [Operator's Guide] on the supplied Setup DVD-ROM.  
July 2010  
<Trademarks and registered trademarks>  
Microsoft, Windows, Windows Server, Windows Vista, and SharePoint are either registered trademarks or  
trademarks of Microsoft Corporation in the United States and/or other countries.  
Intel, Pentium, and Intel Core are trademarks or registered trademarks of Intel Corporation in the United  
States and other countries.  
ISIS and QuickScan are either registered trademarks or trademarks of EMC Corporation in the United  
States.  
Adobe, the Adobe logo, and Acrobat are either registered trademarks or trade names of Adobe Systems  
Incorporated in the United States and/or other countries.  
Other company names and product names are the registered trademarks or trademarks of the respective  
companies.  
All Rights Reserved, Copyright© PFU LIMITED 2010  
Checking the Components  
Make sure that all items shown below are included in the package. If any other packaging is provided, make  
sure to store it as well. Make sure to handle the components with care.  
The box and packaging materials are required for storage and transportation of the scanner. Do not throw  
them away. If anything is missing or damaged, contact your FUJITSU scanner dealer or an authorized  
FUJITSU scanner service provider.  
ADF Paper  
Chute (× 1)  
AC Cable (× 1)  
AC Adapter (× 1)  
USB Cable (× 1)  
Scanner (× 1)  
Getting Started  
(this manual) (× 1)  
Safety Precautions (× 1) Setup DVD-ROM (× 1) Adobe® Acrobat®  
DVD-ROM (× 1)  
QuickScanâ„¢ Pro brochure (× 1)  
Carrier Sheet (× 1)  
Note: The contents may vary depending on the country.  
 
1
z Scan to Microsoft SharePoint  
An application that allows you to upload your  
files easily from ScandAll PRO to a SharePoint  
site. Can be installed together with ScandAll  
PRO.  
System Requirements  
System requirements are as follows.  
zWindows® XP Home Edition  
zWindows® XP Professional  
zWindows® XP Professional x64  
Edition (*1)  
z QuickScan Pro (trial)  
An application for image scanning that  
conforms to the ISIS standard. By using an  
ISIS driver, you can scan documents as  
images. This is a trial version, and can be  
executed 30 times before it is disabled. You  
will need to purchase the full product version if  
you wish to continue using it.  
zWindows Server® 2003, Standard  
Edition (*2)  
zWindows Server® 2003, Standard  
x64 Edition (*1) (*2)  
zWindows Server® 2003 R2,  
Standard Edition  
zWindows Server® 2003 R2,  
Standard x64 Edition (*1)  
zWindows Vista® Home Basic (32-  
bit/64-bit) (*1)  
z Manuals  
Includes the Getting Started, Operator's Guide,  
How to Use ScandAll PRO, FUJITSU TWAIN  
User's Guide, and Image Processing Software  
Option User's Guide.  
zWindows Vista® Home Premium  
(32-bit/64-bit) (*1)  
zWindows Vista® Business (32-bit/  
Operating  
®
®
z Adobe Acrobat Standard  
system  
64-bit) (*1)  
The de-facto standard application used for  
creating, editing, managing, and making use of  
digitalized documents in PDF format.  
zWindows Vista® Enterprise (32-bit/  
64-bit) (*1)  
zWindows Vista® Ultimate (32-bit/  
64-bit) (*1)  
Adobe® Acrobat®, bundled with the  
scanner, may be upgraded without  
notice.  
Refer to Adobe Acrobat Help if the  
actual screens differ from those  
described in this manual.  
zWindows Server® 2008 Standard  
(32-bit/64-bit) (*1)  
zWindows Server® 2008 R2,  
Standard (64-bit) (*1)  
zWindows® 7 Home Premium (32-  
bit/64-bit) (*1)  
zWindows® 7 Professional (32-bit/  
64-bit) (*1)  
zWindows® 7 Enterprise (32-bit/64-  
bit) (*1)  
zWindows® 7 Ultimate (32-bit/64-bit)  
(*1)  
Intel® Coreâ„¢ 2 Duo 2.2 GHz or  
higher recommended  
(Minimum of Intel® Pentium® 4 1.8  
GHz)  
CPU  
Memory 1 GB or more recommended  
Display 1024 x 768 or higher, 65536 colors  
resolution or more  
Hard disk 1.2 GB or more of free hard disk  
space  
space is required (*3)  
DVD drive Essential for installing the software  
Interface USB2.0 (High-Speed)  
*1: QuickScan Pro does not support the  
Windows® 64-bit version.  
*2: Not supported by ScandAll PRO.  
 
3
*3: Disk space corresponding to the resulting  
scanned file size is required when scanning  
documents.  
If the [fi series Image Scanner Setup]  
screen does not appear, find  
"Install.exe" in the Setup DVD-ROM  
using "Windows Explorer" or  
Windows Vista® screen examples are  
used to explain the operations. The  
screens and operations may differ slightly  
depending on the operating system you  
are using.  
"Computer" and execute it directly.  
3. Click the [INSTALL (Recommended)]  
button.  
Where there is no distinction between the  
different versions of the operating system  
shown in the table of system  
requirements, the general term Windows®  
is used.  
Installing the Bundled Software  
The following describes how to install the bundled  
software from the "Setup DVD-ROM" contained in  
the scanner package.  
There are two ways to install the bundled  
software: [INSTALL (Recommended)] which  
installs all software needed to operate the  
scanner, or [INSTALL (Custom)] which installs  
selected software one at a time.  
4. Install the software, following the on-  
screen instructions.  
For how to install Adobe® Acrobat®, refer to  
"Installing Adobe® Acrobat®" (page 5).  
â–  INSTALL (Custom)  
1. Perform Steps 1. to 2. in "INSTALL  
zIf an old version of the software is  
installed already, uninstall it first. For  
how to uninstall software, refer to "A.4  
Uninstalling the Software" in the  
Operator's Guide.  
(Recommended)" (page 4).  
2. Click the [INSTALL (Custom)] button.  
zLog on as a user with "Administrator"  
privileges (Administrators).  
â–  INSTALL (Recommended)  
For [INSTALL (Recommended)], the following  
software can be installed.  
z TWAIN driver  
z Software Operation Panel  
z Error Recovery Guide  
z ScandAll PRO  
z Scan to Microsoft SharePoint  
z Manuals  
D The [INSTALL PRODUCTS] screen  
appears.  
3. Click the button of the software to be  
1. Turn on your computer and log on to  
®
installed.  
Windows .  
4. Install the software, following the on-  
2. Insert the Setup DVD-ROM into the DVD  
screen instructions.  
drive.  
Repeat Steps 3. to 4. to install other software  
here.  
D The [fi series Image Scanner Setup]  
screen appears.  
 
4
         
®
®
Installing Adobe Acrobat  
Installing the Scanner  
The following describes how to install the scanner.  
Install Adobe® Acrobat® using the following  
procedure from the "Adobe® Acrobat® DVD-ROM"  
supplied with the scanner.  
1. Place the scanner at its installation site.  
You do not have to install Adobe®  
Acrobat® if it is already installed on your  
computer.  
380  
(14.96)  
®
®
1. Insert the supplied "Adobe Acrobat  
DVD-ROM" into the DVD drive.  
130(5.12)  
D The DVD-ROM is recognized  
automatically, and the following dialog box  
appears.  
292  
143  
493.5  
(11.50)  
(5.63)  
(19.43)  
850  
(33.46)  
Unit: mm (in.)  
Scanner's Dimensions  
Installation Space  
Carry the scanner by supporting it  
from the bottom.  
2. Attach the ADF paper chute.  
Insert the tabs on the ADF paper chute into  
the slots on the back of the scanner, and  
push in to lock it firmly.  
This dialog box is not displayed  
automatically when the [Auto play]  
setting of your computer is  
deactivated. In this case, run  
"AutoPlay.exe" of this DVD-ROM  
directly using the "Windows Explorer"  
or "Computer".  
ADF Paper Chute  
Tab  
Side Guide  
2. Select [US English] in [Select The  
Language], and then click the [OK] button.  
D The following dialog box appears.  
3. Follow the on-screen instructions to install  
the software.  
Refer to Adobe Acrobat Help about how  
to use Adobe® Acrobat®.  
This Acrobat version does not support Windows  
Server® 2008.  
 
5
 
3. Connect the AC cable with the AC adapter  
(hereinafter referred to as "the power  
cable").  
Connecting the Cables  
The following describes how to connect the cables  
between the scanner and your computer.  
WARNING  
AC Adapter  
AC Cable  
Be sure to use the supplied power cable.  
The following cases may cause electrical  
shock or malfunction.  
4
zUsing a power cable other than that  
supplied  
zUsing the supplied power cable for other  
devices  
4
2
3
Power Connector  
4. Connect the power cable to the power  
connector of your scanner and to the AC  
outlet.  
2
USB Connector  
1
USB Cable  
When you plug the AC cable into an  
outlet, the [Power] button of the  
operator panel on the scanner will  
flash once. Note that this is an initial  
diagnosis and not a malfunction.  
CAUTION  
Do not use AC adapters other than the one  
supplied with this scanner. Doing so may  
cause damage to the scanner.  
Manufacturer: Sanken Electric Co., Ltd.  
Model number: SED80N2-24.0  
1. Make sure that the computer is turned off.  
2. Connect the USB cable with the USB  
connector of the scanner and the USB port  
of the computer.  
zBe sure to use the USB cable which  
comes as an accessory with this  
scanner.  
zWhen connecting to an USB hub,  
use the first stage USB hub that is  
closest to the computer. If you use  
the second or later hub stages, the  
scanner may not operate correctly.  
zIf you connect the scanner with USB  
2.0, it is required that the USB port  
and the hub be compliant with USB  
2.0. The scanning speed slows down  
when you connect the scanner with  
USB 1.1.  
zConnect the USB cable with the side  
showing the USB mark facing up.  
USB mark should  
face up  
 
6
4. Lift up the stacker and stacker extension  
according to the length of the sheet.  
Test-Scanning Documents  
Side Guides  
Chute  
Using ScandAll PRO, you can test-scan  
documents to check if they are scanned correctly.  
The following describes how to test-scan a  
document:  
Stacker  
Extension 2  
Extension  
Chute  
Extension 1  
1. Press the [Power] button on the operator  
panel of the scanner.  
Stacker  
Check  
Check LED  
4. Launch ScandAll PRO.  
Function  
Number  
Display  
Function  
Select the [Start] menu J [All Programs] J  
[Fujitsu ScandAll PRO] J [ScandAll PRO].  
Send to  
Scan  
/Stop  
Power  
5. Select the [Tool] menu J [Preferences].  
D The [Setup] dialog box appears.  
[Power] Button  
6. On the [Scan] tab, select a driver to use,  
D The power is turned on, and the [Power]  
button lights in green.  
During initialization, the Function Number  
Display of the operator panel changes as  
follows: "8" J "P" J "0" J "1". The  
scanner is ready when "1" is displayed.  
and then click the [OK] button.  
To use a TWAIN driver, click [TWAIN].  
To use an ISIS driver, click [ISIS/VRS].  
7. Select the [Scan] menu J [Select  
Scanner].  
If "1" is not shown in the Function  
Number Display, refer to "Chapter 8  
Troubleshooting" in the Operator's  
Guide.  
D The [Select Scanner] dialog box appears.  
8. Select the scanner you want to use, and  
then click the [Select] button.  
Select the scanner model which is connected  
to your computer.  
The list of scanner models varies depending  
on the scanner driver installed.  
When you press the [Power] button,  
the Check LED will flash once. Note  
that this is an initial diagnosis and not  
a malfunction.  
TWAIN Driver  
ISIS Driver  
2. Turn on your computer.  
FUJITSU fi-6110dj  
Fujitsu fi-6110  
D The scanner is automatically detected.  
When the [Found New Hardware]  
dialog box appears, select [Locate and  
install driver software  
9. Click the [Scan] menu J [Scan Settings].  
D The [Scan Settings] dialog box appears.  
(recommended)], and install the driver  
by following the on-screen  
instructions.  
10. Clear the [Save to file] check box.  
3. Load a sheet into the scanner.  
1. Pull out the chute extension 1 and chute  
extension 2 according to the length of the  
sheet.  
You only check the operation now, so  
you do not have to save to file.  
2. Load the document in the ADF paper chute.  
Set the sheet with its front side (scanning  
side) facing the ADF paper chute.  
11. Click the [Scanner Setting] button.  
D The scanner driver's setup dialog box  
3. Adjust the side guides to the width of the  
appears.  
sheet.  
 
7
12. Configure scanner settings such as the  
Contact for Inquiries  
Refer to the contact list on the last page of the  
"Safety Precautions" document.  
resolution and paper size.  
zTWAIN/ISIS drivers  
Configure scan settings, and then click the  
[OK] button.  
The scanner driver setup dialog box  
may be displayed again after the [OK]  
button is clicked. If this occurs, click  
the [Scan] button in the dialog box.  
13. In the [Scan Settings] dialog box, click the  
[Scan] button.  
D The scanned document images are  
displayed in the ScandAll PRO window.  
When an error occurs in the scanner,  
the Function Number Display  
alternates between either "J" or "U"  
and an "error number" for temporary  
errors, and either "E", "H" or "L" and  
an "alarm number" for device errors.  
If an error occurs, refer to "Chapter 8  
Troubleshooting" in the Operator's  
Guide.  
For information about other scanning features,  
refer to "Chapter 5 Various Ways to Scan" in the  
Operator's Guide.  
 
8

Eton Automobile E1 User Manual
Evolution Technologies Electronic Keyboard MK 149 User Manual
Fisher Price Fitness Equipment K9125 User Manual
Flymo Trimmer CT250 User Manual
FujiFilm Camcorder J100 User Manual
FujiFilm Digital Camera 106 8620 User Manual
Fujitsu Tablet Accessory FPCCC27 User Manual
GE TV Receiver 05GP005 User Manual
GE Washer EWA4500 User Manual
Giant Water Pump P420A 3100 User Manual